Wide range of variations
The most suitable module can be selected to place components from microchips to odd-shaped components, as well as depending on the products and the production volume.
*Heads can be changed after purchase.
Improves actual productivity with lighter high-speed head and new optimization
Lighter high-speed head and new manufacturing sequence optimization has increased productivity by 7 % compared to the former optimization model Ver.4.
New high-flexibility 8 nozzles head Further component handling capability
The generalized Ver.5 (optional) expands existing component range. A wide variety of components, ranging from a 0402 chip to 50mm and a large size connector (100× 50mm),have become mountable.
The 3D sensor and direct tray feeder can be installed as before providing superior handling capabilities for odd-shaped components.
Improves area productivity with compact feeder carts
Increases placement reliability by the 3D sensor
High-quality placement for IC component via the 3D sensor
High-speed detection via batch scanning.
Multifunctional transfer unit supporting POP and C4
Highly versatile unit accurately transfers solder/flux for POP top packaging/C4 mounting on the bump side.
| Model ID | CM602-L |
| Model No. | NM-EJM8A |
| PCB dimensions (mm) | L 50 x W 50 to L 510 x W 460 |
| High-speed head | 12 nozzles |
| Max.speed |
100 000 cph (0.036 s/chip |
| Placement accuracy |
±40 µm/chip (Cpk 1) |
| Component dimensions (mm) | 0402 chip *5 to L 12 × W 12 × T 6.5 |
| High-flexibility head | LS 8 nozzles |
| Max.speed |
75 000 cph (0.048 s/chip |
| Placement accuracy |
±40 µm/chip, ±35 µm/QFP  24 mm,±50 µm/QFP < 24 mm (Cpk1) |
| Component dimensions (mm) |
0402 chip *5 to L 32 × W 32 × T 8.5 *8 When the generalized Ver.5 is optionally selected 0402 chip *5 to L 100 mm × W 50 mm × T 15 mm *6 |
| Multi-functional head | 3 nozzles |
| Max.speed |
20 000 cph (0.18 s/QFP |
| Placement accuracy |
±35 µm/QFP (Cpk1) |
| Component dimensions (mm) | 0603 chip to L 100 × W 90 × T 25 *7 |
| PCB exchange time | 0.9 s (Board length:up to 240 mm Under optimum conditions) |
| Electric source | 3-phase AC 200, 220, 380, 400, 420, 480 V, 4.0 kVA |
| Pneumatic source *1 | 0.49 MPa, 170 L /min(A.N.R.) |
| Dimensions (mm) | W 2 350 x D 2 290 *2 x H 1 430 *3 |
| Mass *4 | 3 400 kg |
*1:Only for main body
*2:Dimension D including direct tray feeder:2 565 mm
*3:Excluding monitor and signal tower
*4:Standard configuration:excluding batch exchange cart and tray feeders. This may differ depending on configuration.
*5:The 0402 chip requires a specific nozzle/feeder.
*6:When T is more than 11.5mm,special nozzles are needed.Please consult us separately.
*7:When T is more than 21mm,special nozzles are needed.Please consult us separately.
*8:When T is more than 6.5mm,special nozzles are needed.Please consult us separately.
*Values such as maximum speed and placement accuracy may vary depending on operating conditions.
*Please refer to the "Specification" booklet for details.